+ 91 - 83980 - 00476 + 91 - 171 - 2699475 info@kcengineers.com

KCPC-112 FLOW CONTROL TRAINER

Free!

The present set-up is designed to study a PID Controlled Flow Process in the industry. Water is pumped from the sump tank by means of a centrifugal pump to a Pneumatic Control Valve and after passing thorough the Rotameter it return back to the sump. The Differential Pressure transmitter with an Orificemeter is fitted in the water line. The differential Pressure across the orifice in flow line of water is sensed by the transmitter and communicated to the digital indicating controller. This measured variable is compared with the Set Point by controller and output is generated and given to I/P converter, which in turn supply the 3-15 Psig pressure to vary the opening of the Pneumatic control valve to eliminate the error observed. As the opening of pneumatic control valve varies, the flow of water in the line gets affected. This process goes on until the Set Point target is achieved. A rotameter is also provided in the water line to disturb the system and to observe the effect of disturbance. As the water returns in the sump tank again, the system operates in close circuit. These units along with necessary piping are supported in a well-designed housing and are fixed on base plate.
Know More

Reviews

There are no reviews yet.

Be the first to review “KCPC-112 FLOW CONTROL TRAINER”